This fingerprint padlock is made of No.3 zinc alloy, which has passed the IP65 waterproof test, salt test, high and low temperature test, torque test, etc. Your finger is the key, and fingerprint recognition only takes 0.5 seconds.
Type Fingerprint padlock
MOQ 1000 pieces
Material No.3 Zinc Alloy
Support devices IPhone IOS 9.0 or above
Android phone 4.3 or above
|Material||Lock body: No. 3 zinc alloy, Lock beam: 303 stainless steel|
Lock body: pearl chrome plated on the surface
Lock beam: stainless steel natural color
standby 180 days (unlock average 5 times per day). continuous unlock for more than 2000 times
Capacitive semiconductor sensor,
Pixel array: 120*120,
False recognition rate FAR<0.001%,
False rejection rate FRR<2%,
Response speed <500ms.
|Encryption|| AES encryption 128 bit|
|Battery parameters||Nominal voltage 3.7VCapacity 150mA; Rechargeable lithium battery|
|Operating temperature||-20℃ to 70℃|
|Working humidity||5%～95% (no condensation)|
|Waterproof level||IP65 (dust proof and prevent strong water spraying)|
What should I do if the blue light of the smart lock does not flash when charging
Please check whether the charging cable is plugged in and whether the charging head is normal. If you use a rechargeable smart lock, it is recommended to charge it in time when the power is below 20%, about once every 6 months. Failure to charge for a long time may cause damage to the battery.
Why I cannot log in to the app or the app crashes?
Please restart the phone or delete the app to download and install again.
What should I do if the Bluetooth function of my mobile phone cannot be used?
Make sure your phone is fully charged. In the phone's settings, make sure that Bluetooth is enabled. If you can't turn on Bluetooth, try restaring your phone and restarting the application.
What should I do if the indicator light is off, the red and blue lights are flashing, but the lock cannot be unlocked or locked?
When the battery of the lock is low or dead,it will show this, please charge or replace the battery in time.