The management password for the security door fingerprint lock forgot how to handle it? At this time we can only return to the factory model or call the relevant unlocking master to come over, how to operate after restoring the factory mode?
1. Fingerprint module and application system: This is the foundation of the electronic part. Its peers function is different. Mainly still see which chip is used, which is used, which is a long-term market verification. it is good. Be
2. Factory Initialization: Press the tap button on the motherboard. After listening to the "Enter Initialization" prompt, start initialization, and initialize the tone. Be
3, enter the door password: Press the "Add" button, after the tone, "Enter the management password, end", enter the management password, enter the door password, press the # 号, press the ## key to confirm; re-enter the door password, press # 号 键 Confirm.
Be
4, enter the door-to-door fingerprint: press the "Add" button, after the tone, "enter the management password, end with # number", enter the management password, press the fingerprint, after the first entry is successful, prompt "Recourse again", Then, according to the fingerprint, it is successful, but the different types of models different models are different, and the above methods are for reference only, and it is recommended to prevail with the specification. Be
The above is the management password for the security door fingerprint lock forgot how to handle the entire content..